Skip to content

Exit Station with AkroMARK™ Hot Stamp Markers

Akro Mark
  • Exit Station with AkroMARK Hot Stamp Marker +

    The exit station accepts the tire from the test station, positions it for marking, and applies the high point or grade mark if an optional marker is installed.  This item includes a manually operated drop gate that permits easy and comprehensive access to the test station for rim change, tire setup, and periodic maintenance.  The tire is either taken off the line manually or can be sorted using an optional three position sorter.

    Tires are positioned in the test station for the proper marking orientation angle prior to transfer to the exit station.

    The exit station is a flexible arrangement so that customers can easily add markers according to their needs.  Space is provided above and below for mounting markers.  An easy-to-use ladder logic programming utility is provided for creating and revising sequence control code.

    All markers are optional. These include:

    High Point Grade Marker Top

    This option includes one ink or AkroMARK™ hot stamp marker that places a 10mm diameter dot at the high (or low) point of radial harmonic force variation.  The marker is mounted on a bracket above the marker conveyor.  The tilt axis setup is manual for ink markers and automatic for AkroMARK™

    Upper and Lower Hot Stamp Markers

    This option uses two ink or AkroMARK™ hot stamp markers to mark the high (or low) point of radial harmonic force variation on the top or bottom side of the tire.

    When used as a combination (Top & Bottom), this can indicate the side of (+) or (-) conicity.

  • Brochures +